AVR Devices Configurable logic, microcontrollers, nonvolatile memories Based on the following sources: <ul> <li>www.atmel.com <li>CD-ROM : Configurable Logic Microcontroller Nonvolatile Memory <li>CadSoft download site, www.cadsoft.de or www.cadsoftusa.com , file at90smcu_v400.zip <li>avr.lbr </ul> <author>Revised by librarian@cadsoft.de</author> Dual In Line Package >NAME >VALUE Dual In Line >NAME >VALUE Dual In Line 0.3 inch >NAME >VALUE Dual In Line >NAME >VALUE Throughhole Plastic J-Leaded Chip Carrier Socket >VALUE >NAME 44 Plastic J-Leaded Chip Carrier >NAME >VALUE SMD Plastic J-Leaded Chip Carrier Socket >NAME >VALUE Plastic Shrink Small Outline Package >NAME >VALUE Wide Plastic Gull Wing Small Outline Package >NAME >VALUE Small Outline Package SOIC 0.300" >NAME >VALUE Thin Plasic Quad Flat Package >NAME >VALUE Wide Plastic Gull Wing Small Outline Package >NAME >VALUE Logo R Plastic Quad Flat Package >NAME >VALUE PQFP-44 PLASTIC LEADED CHIP CARRIER rectangle >NAME >VALUE TSOP32 thin small outline package >NAME >VALUE 1 Dual In Line >NAME >VALUE SMALL OUTLINE INTEGRATED CIRCUIT extra wide body 8.9 mm/JEDEC MO-120AC >NAME >VALUE 8M, 8-Lead, 0.118" Wide, Miniature Small Outline Package MSOP 8M-Package doc1097.pdf >NAME >VALUE Thin Plasic Quad Flat Package Grid 0.8 mm >NAME >VALUE PSSO20 >NAME >VALUE Thin Quad Flat Pack >NAME >VALUE PLASTIC LEADED CHIP CARRIER square >NAME >VALUE SSOP 24 Source: Uploaded by Heiko Künzel <heiko.kuenzel@atg-gera.de> from ATG Automatisierungstechnik Gera Mon Mar 10 13:32:48 2003 Atmel-Library mit zusätzlich T83C5121-Prozessor im SSOP24-Package. Package centre and <NAME & <VALUE placed by librarian@cadsoft.de. >NAME >VALUE Plastic J-Lead Chip Carrier >NAME >VALUE TQFP 80 thin quad flat pack Source: www.atmwel.com .. doc4109.pdf >NAME >VALUE Ball Grid Array 81 leads Source: www.atmwel.com .. doc4109.pdf >NAME >VALUE SMALL OUTLINE INTEGRATED CIRCUIT wide body 7.5 mm/JEDEC MO-119AB Source: http://www.atmel.com/dyn/resources/prod_documents/doc4126.pdf >NAME >VALUE SMALL OUTLINE INTEGRATED CIRCUIT wide body 7.5 mm/JEDEC MO-119AA Source: http://www.atmel.com/dyn/resources/prod_documents/doc4126.pdf >NAME >VALUE PLASTIC LEADED CHIP CARRIER Source: http://www.atmel.com/dyn/resources/prod_documents/doc4126.pdf >NAME >VALUE Quad Flat Pack Source: http://www.atmel.com/dyn/resources/prod_documents/doc4126.pdf >NAME >VALUE Auto generated by make-symbol-device-package(bsdl).ulpSource: at91rm9200_bga.bsd Thin Shrink Small Outline Plastic 20 MAX3223-MAX3243.pdf >NAME >VALUE Plastic Leaded Chip Carrier >VALUE >NAME 64M1 Micro Lead Frame package (MLF) >NAME >VALUE Thin Plasic Quad Flat Package Updated from atml.lbr 17.01.2005 alf@cadsoft.de >NAME >VALUE 64-lead VQVP Source. http://www.atmel.com/dyn/resources/prod_documents/doc4136.pdf >NAME >VALUE 64M1 Micro Lead Frame package (MLF) >NAME >VALUE 32M1-A Micro Lead Frame package (MLF) >NAME >VALUE HP-VFQFP-N16 Micro Lead Frame package (MLF) >NAME >VALUE HP-VFQFP-N20 QFN 20 -5 x 5 mm Micro Lead Frame package (MLF) Source: http://www.atmel.com/dyn/resources/prod_documents/doc4533.pdf >NAME >VALUE HP-VFQFP-N16 Micro Lead Frame package (MLF) >VALUE HP-VFQFP-N20 5 x 5 mm Micro Lead Frame package (MLF) Source: http://www.atmel.com/dyn/resources/prod_documents/doc4533.pdf >NAME >VALUE 32M1-A Micro Lead Frame package (MLF) >NAME >VALUE 44M1 Micro Lead Frame package (MLF) >NAME >VALUE 44-Lead Plastic Quad Flat No Lead Package (ML) 8x8 mm Body (QFN) Source: http://ww1.microchip.com/downloads/en/devicedoc/39632c.pdf >NAME >VALUE LQFP 100 Source: 6120s.pdf >NAME >VALUE R TFBGA 100 Source: 6120s.pdf >NAME >VALUE 8A2-TSSOP Source: http://www.atmel.com/dyn/resources/prod_documents/doc5089.pdf >NAME >VALUE 10M1 10-pad, 3 x 3 x 1.0 mm Body Lead Pitch 0.50 mm, 1.64 x 2.60 mm Exposed Pad, Micro Lead Frame Package MLF10, QFN10 Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf >NAME >VALUE 8S2 8-lead, 0.208 Body Plastic Small Outline Package (EIAJ) Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf >NAME >VALUE 8S1 8-lead (0.150" Wide Body) Plastic Gull Wing Small Outline (JEDEC SOIC) Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf >NAME >VALUE 20M1 20-pad, 4 x 4 x 0.8 mm Body Lead Pitch 0.50 mm, 2.6 mm Exposed Pad, Micro Lead Frame Package (MLF) Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf >NAME >VALUE Thin Plasic Quad Flat Package >NAME >VALUE 44M1 Micro Lead Frame package (MLF) Source: http://www.atmel.com/dyn/resources/prod_documents/doc2593.pdf >NAME >VALUE Thin Quad Flat Pack >NAME >VALUE 64M1 64-pad, 9 x 9 x 1.0 mm Lead Pitch 0.50 mm, 5.40 mm Exposed Pad, Micro Lead Frame Package (MLF) Source: http://www.atmel.com .. doc8023.pdf >NAME >VALUE 28T 28-lead (8 x 13.4 mm) Plastic Thin Small Outline Type I (TSOP) Source: http://www.atmel.com/dyn/resources/prod_documents/doc3542.pdf >NAME >VALUE 8M1-A-MLF (VDFN) 6 x 5 mm Source: http://www.atmel.com/dyn/resources/prod_documents/doc3500.pdf >NAME >VALUE >VALUE >NAME LQFP144 Package >NAME >VALUE Thin Quad Flat Pack package type TQ >NAME >VALUE PIN HEADER JTAG 10 Pin, 0.1" Straight >NAME >VALUE PIN HEADER JTAG 10 Pin, 0.1" Right Angle >NAME >VALUE Plastic Quad Flat Non-leaded package 64 pins, 9 × 9 × 0.85 mm³, 0.5 mm pitch Source: https://www.micronas.com .. mas35x9f_3ds.pdf >NAME >VALUE DIL08 300mil >NAME >VALUE Small Outline Medium Plastic Gull Wing 208-mil body >NAME >VALUE Small Outline Narrow Plastic Gull Wing 150-mil body >NAME >VALUE TSSOP 8-lead, 4.4mm >NAME >VALUE 44A, 44-lead, 10 x 10 mm Body Size, 1.0 mm Body Thickness, 0.8 mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP) >NAME >VALUE TQFP 44 R 44M1, 44-pad, 7 x 7 x 1.0 mm Body, Lead Pitch 0.50 mm, 5.20 mm Exposed Pad, Thermally Enhanced Plastic Very Thin Quad Flat No Lead Package (VQFN) >NAME >VALUE 49C2, 49-ball (7 x 7 Array), 0.65 mm Pitch, 5.0 x 5.0 x 1.0 mm, Very Thin, Fine-Pitch Ball Grid Array Package (VFBGA) >NAME >VALUE 100A, 100-lead, 14 x 14 mm Body Size, 1.0 mm Body Thickness, 0.5 mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP) >NAME >VALUE TQFP 100 R 100C1, 100-ball, 9 x 9 x 1.2 mm Body, Ball Pitch 0.80 mm Chip Array BGA Package (CBGA) >NAME >VALUE 100C2, 100-ball (10 x 10 Array), 0.65 mm Pitch, 7.0 x 7.0 x 1.0 mm, Very Thin, Fine-Pitch Ball Grid Array Package (VFBGA) >VALUE >NAME 64A, 64-lead, 14 x 14 mm Body Size, 1.0 mm Body Thickness, 0.8 mm Lead Pitch, Thin Profile Plastic Quad Flat Package (TQFP) >NAME >VALUE TQFP 64 R 64M2, 64-pad, 9 x 9 x 1.0 mm Body, Lead Pitch 0.50 mm, 7.65 mm Exposed Pad, Micro Lead Frame Package (MLF) >NAME >VALUE PIN HEADER JTAG 6 Pin, 0.1" Straight >NAME >VALUE PIN HEADER AVR ISP 6 Pin, 0.1" Right Angle >NAME >VALUE PIN HEADER AVR ISP 10 Pin, 0.1" Straight >NAME >VALUE PIN HEADER AVR ISP 10 Pin, 0.1" Right Angle >NAME >VALUE Small Outline Package >NAME >VALUE Dual In Line Package >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE Small Outline Package, large >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE >NAME >VALUE 3M (TM) Pak 100 4-Wall Header Straight Source: 3M >NAME >VALUE VERTICAL HEADER 20 position >NAME >VALUE CABGA-324 pitch 0.80, outline 15x15 mm >NAME >VALUE Plastic Quad Flat Pack 208-pin >NAME >VALUE >NAME >VALUE LQFP64 >NAME >VALUE PLCC44 dla ATMEGA 8535 ATMEGA8535 PLC44 SMALL OUTLINE INTEGRATED CIRCUIT body 3.9 mm/JEDEC MS-012AA >NAME >VALUE Dual In Line >NAME >VALUE QFN10 10M1, 10-pad, 3 x 3 x 1.0 mm Body, Lead Pitch 0.50 mm, 1.64 x 2.60 mm Exposed Pad,JEDEC reference MO-229C, >VALUE >NAME >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE VCC GND >NAME >VALUE VCC GND >VALUE >NAME VCC GND /INT1 /INT0 /RxD /TxD >VALUE >NAME >NAME >NAME >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME USB Flash A/D TWI PCM VDD VSS >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME AT32UC3B1XXX AT32UC3LXXXX >NAME >NAME TDI TDO TMS TCK VCC VREF SRST TRST GND GND >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME AVR ISP MOSI SCK MISO VCC RST GND >NAME AVR ISP MOSI MISO SCK RST VTG GND GND GND GND GND >NAME AVR PDI CLOCK DATA VCC GND >NAME AVR TPI CLOCK DATA VTG RESET GND >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >VALUE >NAME >NAME GND GND GND GND GND GND GND GND GND VTAR VREF NTRST TDI TMS TCK RTCK TDO RST OBGRQ OBGACK JTAG >NAME >VALUE >VALUE >NAME >VALUE >NAME >NAME >VALUE ATMEGA 8535 ATMEGA 8535 16JU >NAME >VALUE >VALUE >NAME >VALUE >NAME >NAME >VALUE >VALUE >NAME >VALUE >NAME MICROCONTROLLER 4 Kbytes FLASH 256 bytes SRAM 256 bytes EEPROM UART 8-channel 10 bit ADC MICROCONTROLLER Low-voltage (LS) 4 Kbytes FLASH 256 bytes SRAM 256 bytes EEPROM UART 8-channel 10 bit ADC MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM UART 8-channel 10 bit ADC MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM UART 8-channel 10 bit ADC MICROCONTROLLER 4 Kbytes FLASH 256 bytes SRAM 256 bytes EEPROM UART MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM UART MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM UART MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM UART MICROCONTROLLER 2 Kbytes FLASH 128 bytes SRAM 128 bytes EEPROM UART 6-channel 10-bit ADC MICROCONTROLLER 2 Kbytes FLASH 128 bytes SRAM 128 bytes EEPROM UART 6-channel 10-bit ADC MICROCONTROLLER 4 Kbytes FLASH 128 bytes SRAM 256 bytes EEPROM UART 6-channel 10 bit ADC MICROCONTROLLER 2 Kbytes FLASH 128 bytes SRAM 128 bytes EEPROM MICROCONTROLLER 2 Kbytes FLASH 128 bytes SRAM 128 bytes EEPROM MICROCONTROLLER 2 Kbytes FLASH 128 bytes SRAM 128 bytes EEPROM UART MICROCONTROLLER 1 Kbytes FLASH 64 bytes EEPROM MICROCONTROLLER 1 Kbytes ROM MICROCONTROLLER 1 Kbytes FLASH MICROCONTROLLER 1 Kbytes FLASH 64 bytes EEPROM MICROCONTROLLER 1K ROM 128 bytes RAM 128 bytes EEPROM MICROCONTROLLER Low-voltage (L) 128 Kbytes FLASH 4 Kbytes SRAM 2 Kbytes EEPROM UART RTC 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes EEPROM 256 bytes SRAM 6-channel 10-bit A/D MICROCONTROLLER 16 Kbytes FLASH 512 bytes EEPROM 1 Kbytes SRAM dual UART hardware multiplier Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 512 bytes EEPROM 1 Kbytes SRAM dual UART hardware multiplier Source: avr.lbr MICROCONTROLLER 2.7 V 1 Kbytes FLASH 64 bytes EEPROM 4-channel 10 bit ADC MICROCONTROLLER 16 Kbytes FLASH 1 Kbytes EEPROM 1 Kbytes SRAM UART 8-channel 10 bit ADC hardware multiplier Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 1 Kbytes EEPROM 1 Kbytes SRAM UART 8-channel 10 bit ADC hardware multiplier Source: avr.lbr MICROCONTROLLER 1.8 V 2 Kbytes FLASH MICROCONTROLLER 1.8 V 2 Kbytes FLASH SPI bus serial EEPROM 2-wire serial EEPROM I2C/MicroWire EEPROM (24xxx) 3-wire serial EEPROM 80C31 MICROCONTROLLER 2 Kbytes FLASH 2.7 V MICROCONTROLLER Low-voltage (L) 128 Kbytes FLASH 4 Kbytes SRAM 2 Kbytes EEPROM UART RTC 8-channel 10 bit ADC MICROCONTROLLER 8 Kbytes FLASH; 2K Bytes EEPROM Compatible with MCS-51 Products at89s8252.pdf 8-Megabit (1Mx8) OTP EPROM AT91 ARM® Thumb® RISC-Controller Microcontroller AT91R40008 8-bit AVR Microcontroller with 2K Bytes Flash Source: http://www.atmel.com .. doc1477.pdf 128-voice Integrated Sound Synthesizer 8-bit Microcontroller with Multiprotocol Smart Card Interface Source: Uploaded by Heiko Künzel <heiko.kuenzel@atg-gera.de> from ATG Automatisierungstechnik Gera Mon Mar 10 13:32:48 2003 Atmel-Library mit zusätzlich T83C5121-Prozessor im SSOP24-Package. 8-bit Microcontroller with Multiprotocol Smart Card Interface Source: http://www.atmel.com/...doc4164.pdf Single-Chip Flash Microcontroller with MP3 Decoder and Human Interface Source: www.atmel.com .. doc4109.pdf 8-bit Microcontroller with 4K Bytes Flash Not Recommended for New Designs. Use AT89S51. Source: http://www.atmel.com/dyn/resources/prod_documents/doc0265. 8-bit Microcontroller with 4K Bytes Flash Not Recommended for New Designs. Use AT89S51. Source: http://www.atmel.com/dyn/resources/prod_documents/doc0265. 8-bit Microcontroller with 4K BytesIn-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/doc2487.pdf 8-bit Microcontroller with 4K BytesIn-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/doc2487.pdf Enhanced 8-bit Microcontroller with CAN Controller and Flash 80C51 Core Architecture Source: http://www.atmel.com/dyn/resources/prod_documents/doc4126. Enhanced 8-bit Microcontroller with CAN Controller and Flash 80C51 Core Architecture Source: http://www.atmel.com/dyn/resources/prod_documents/doc4126. Auto generated by make-symbol-device-package(bsdl).ulp Source: at91rm9200_bga.bsd High perfomance CMOS (electrically erasable) programmable logic device (PLD) ABLE-Atmel-ABEL - P18V8R, P16V8C, P16V8AS, P17V8 COPL Atmel-WinCUPL - G16V8MS, G16V8MA, G16V8AS, G16V8 LOG/IC - GAL16V8_R, GAL16V8_G7, GAL16V8_C), GAL16V8 Tango-PLD - G16V8R, G16V8C, G16V8AS, G16V8 Source: http://www.atmel.com/dyn/resources/prod_documents/DOC0364.PDF MICROCONTROLLER 8 Kbytes FLASH, 1 kbytes SRAM, 512 bytes EEPROM, USART, 6-channel 10 bit ADC, 2-channel 8 bit ADC Pin compatible with Atmega48, ATMega88, ATMega168 Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH, 1 kbytes SRAM, 512 bytes EEPROM, USART, 4-channel 10 bit ADC, 2-channel 8 bit ADC Pin compatible with Atmega48, ATMega88, ATMega168 Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 1 kbytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 1 kbytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 32 Kbytes FLASH 2 Kbytes SRAM 1 Kbytes EEPROM USART 8-channel 10 bit ADC Source: www.atmel.com .. doc2503.pdf MICROCONTROLLER 64 Kbytes FLASH 4 Kbytes SRAM 2 Kbytes EEPROM DUAL USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 128 Kbytes FLASH 4 Kbytes SRAM 4 Kbytes EEPROM DUAL USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 1 Kbytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC 4x25 Segment LCD Driver Source: avr.lbr MICROCONTROLLER 32 Kbytes FLASH 2 Kbytes SRAM 1 Kbytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 32 Kbytes FLASH 2 Kbytes SRAM 1 Kbytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr 8-bit Flash Microcontroller with Full Speed USB Device Source: http://www.atmel.com/dyn/resources/prod_documents/doc4136.pdf Data sheet mistake: define Packge type pin description for MLF48 but Order Number for QFN32 !? USB Microcontroller with 64K Bytes Flash Memory Source: http://www.atmel.com/dyn/resources/prod_documents/doc4173.pdf MICROCONTROLLER 8 Kbytes FLASH, 1 kbytes SRAM, 512 bytes EEPROM, USART, 6-channel 10 bit ADC, 2-channel 8 bit ADC Pin compatible with Atmega48, ATMega88, ATMega168 Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 1 kbytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 32 Kbytes FLASH 2 Kbytes SRAM 1 Kbytes EEPROM USART 8-channel 10 bit ADC Source: www.atmel.com .. doc2503.pdf MICROCONTROLLER 64 Kbytes FLASH 4 Kbytes SRAM 2 Kbytes EEPROM DUAL USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 128 Kbytes FLASH 4 Kbytes SRAM 4 Kbytes EEPROM DUAL USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 16 Kbytes FLASH 1 Kbytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC 4x25 Segment LCD Driver Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr MICROCONTROLLER 8 Kbytes FLASH 512 bytes SRAM 512 bytes EEPROM USART 8-channel 10 bit ADC Source: avr.lbr 8-bit AVR Microcontroller with 2K Bytes Flash Source: http://www.atmel.com .. doc1477.pdf 8-bit Microcontroller with 64K Bytes In-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/doc2593.pdf 8-bit Microcontroller with 64K Bytes In-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/doc2593.pdf Highly integrated Flash microcontrollers based on the 32-bit ARM RISC processor 512/256/128 Kbyte high-speed Flash and 128/64/32 Kbyte SRAM, a large set of peripherals, including an 802.3 Ethernet MAC and a CAN controller Source: http://www.atmel.com/dyn/resources/prod_documents/6120s.pdf Highly integrated Flash microcontrollers based on the 32-bit ARM RISC processor 512/256/128 Kbyte high-speed Flash and 128/64/32 Kbyte SRAM, a large set of peripherals, including an 802.3 Ethernet MAC and a CAN controller Source: http://www.atmel.com/dyn/resources/prod_documents/6120s.pdf Three-wire Automotive Temperature Serial EEPROM 1K (64 x 16) Source: http://www.atmel.com/dyn/resources/prod_documents/doc5089.pdf 8-bit AVR Microcontroller with 1K Bytes In-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf 8-bit AVR Microcontroller with 1K Bytes In-System Programmable Flash Source: http://www.atmel.com/dyn/resources/prod_documents/2535S.pdf Bluetooth/ISM 2.4-GHz Front-End IC Source: http://www.atmel.com/dyn/resources/prod_documents/doc4533.pdf MICROCONTROLLER <h2>Features</h2> <ul><li> High-performance, Low-power 8/16-bit AVR XMEGA Microcontroller</li> <li> Non-Volatile Program and Data Memories</li> - 16 KB - 128 KB of In-System Self-Programmable Flash - 4 KB - 8 KB Boot Code Section with Independent Lock Bits - 1 KB - 2 KB EEPROM - 2 KB - 8 KB Internal SRAM <li> Peripheral Features</li> - Four-channel DMA Controller with support for external requests - Eight-channel Event System - Five 16-bit Timer/Counters <ul>Three Timer/Counters with 4 Output Compare or Input Capture channels</ul> <ul>Two Timer/Counters with 2 Output Compare or Input Capture channels</ul> <ul>High-Resolution Extensions on all Timer/Counters</ul> <ul>Advanced Waveform Extension on one Timer/Counter</ul> - Five USARTs <ul>IrDA Extension on one USART</ul> - Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) - Two SPIs (Serial Peripheral Interfaces) peripherals - AES and DES Crypto Engine - 16-bit Real Time Counter with Separate Oscillator - One Twelve-channel, 12-bit, 2 Msps Analog to Digital Converter - One Two-channel, 12-bit, 1 Msps Digital to Analog Converter - Two Analog Comparators with Window compare function - External Interrupts on all General Purpose I/O pins - Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator <li> Special Microcontroller Features</li> - Power-on Reset and Programmable Brown-out Detection - Internal and External Clock Options with PLL - Programmable Multi-level Interrupt Controller - Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby - Advanced Programming, Test and Debugging Interfaces <ul>PDI (Program and Debug Interface) for programming, test and debugging</ul> <li> I/O and Packages</li> - 34 Programmable I/O Lines - 44 - lead TQFP - 44 - pad VQFN/QFN - 49 - ball VFBGA <li> Operating Voltage</li> - 1.6 - 3.6V <li> Speed performance</li> - 0 - 12 MHz @ 1.6 - 3.6V - 0 - 32 MHz @ 2.7 - 3.6V </ul> <author>Drawn by Dipl.-Ing. (FH) Robert Siegler</author> Created: 27.05.09 MICROCONTROLLER <h2>Features</h2> <ul><li>High-performance, Low-power 8/16-bit AVR XMEGA Microcontroller</li> <li> Non-Volatile Program and Data Memories</li> - 64K - 384K Bytes of In-System Self-Programmable Flash - 4K - 8K Bytes Boot Section with Independent Lock Bits - 2 KB - 4 KB EEPROM - 4 KB - 32 KB Internal SRAM <ul>External Bus Interface for up to 16M bytes SRAM</ul> <ul>External Bus Interface for up to 128M bit SDRAM</ul> <li> Peripheral Features</li> - Four-channel DMA Controller with support for external requests - Eight-channel Event System - Eight 16-bit Timer/Counters <ul>Four Timer/Counters with 4 Output Compare or Input Capture channels</ul> <ul>Four Timer/Counters with 2 Output Compare or Input Capture channels</ul> <ul>High-Resolution Extension on all Timer/Counters</ul> <ul>Advanced Waveform Extension on two Timer/Counters</ul> - Eight USARTs <ul>IrDA modulation/demodulation for one USART</ul> - Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible) - Four SPI (Serial Peripheral Interface) peripherals - AES and DES Crypto Engine - 16-bit Real Time Counter with separate Oscillator - Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters - Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters - Four Analog Comparators with Window compare function - External Interrupts on all General Purpose I/O pins - Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator <li> Special Microcontroller Features</li> - Power-on Reset and Programmable Brown-out Detection - Internal and External Clock Options with PLL and Prescaler - Programmable Multi-level Interrupt Controller - Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby - Advanced Programming, Test and Debugging Interfaces <ul>JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging</ul> <ul>PDI (Program and Debug Interface) for programming and debugging</ul> <li> I/O and Packages</li> - 78 Programmable I/O Lines - 100 - lead TQFP - 100 - ball CBGA - 100 - ball VFBGA <li> Operating Voltage</li> - 1.6 - 3.6V <li> Speed performance</li> - 0 - 12 MHz @ 1.6 - 3.6V - 0 - 32 MHz @ 2.7 - 3.6V </ul> <author>Drawn by Dipl.-Ing. (FH) Robert Siegler</author> Created: 27.05.09 8-bit Microcontroller with 32K Bytes In-System Programmable Flash Source: http://www.atmel.com .. doc8023.pdf Flash-Memory 64-Megabit 2 .7-volt, Dual-interface, DataFlash Source: http://www.atmel.com/dyn/resources/prod_documents/doc3542.pdf 8-bit Microcontroller with 64K Bytes In-System Programmable Flash Auto generated by make-symbol-device-package-bsdl.ulp Rev. 34 Source: http://www.atmel.com/dyn/resources/prod_documents/doc2593.pdf 16-megabit 2.5V or 2.7V DataFlash Source: http://www.atmel.com/dyn/resources/prod_documents/doc3500.pdf High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller  Nonvolatile program and data memories  64K - 256KBytes of In-System Self-Programmable Flash  4K - 8KBytes Boot Code Section with Independent Lock Bits  2K - 4KBytes EEPROM  4K - 16KBytes Internal SRAM  Peripheral features  Four-channel event system  Five 16-bit timer/counters  Four timer/counters with four output compare or input capture channels  One timer/counter with two output compare or input capture channels  High resolution extension on two timer/counters  Advanced waveform extension (AWeX) on one timer/counter  One USB device interface  USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant  32 Endpoints with full configuration flexibility  Three USARTs with IrDA support for one USART  Two two-wire interfaces with dual address match (I2C and SMBus compatible)  Two serial peripheral interfaces (SPIs)  CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator  16-bit real time counter (RTC) with separate oscillator  One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter  Two Analog Comparators with window compare function, and current sources  External interrupts on all general purpose I/O pins  Programmable watchdog timer with separate on-chip ultra low power oscillator  QTouch® library support  Capacitive touch buttons, sliders and wheels  Special microcontroller features  Power-on reset and programmable brown-out detection  Internal and external clock options with PLL and prescaler  Programmable multilevel interrupt controller  Five sleep modes  Programming and debug interface  PDI (program and debug interface)  I/O and packages  50 programmable I/O pins  64-lead TQFP  64-pad QFN  Operating voltage  1.6 – 3.6V  Operating frequency  0 – 12MHz from 1.6V  0 – 32MHz from 2.7V AT32UC3A0128/0256/0512 AT32UC3A1512/1256/1128 AT32UC3B0128/0256/0512 AT32UB3C1128/1256/1512 AT32UC3L016/32/64 Low power AVR32 device AVR JTAG Debug/Programming Header ATMEL 32-bit Microcontroller 64KB, 128KB, 256KB, 512KB 144-pin LQFP (123 GPIO pins) http://www.atmel.com/Images/32117s.pdf ATMEL 32-bit Microcontroller 64KB, 128KB, 256KB, 512KB 100-pin TQFP (81 GPIO pins) http://www.atmel.com/Images/32117s.pdf ATMEL 32-bit Microcontroller 64KB, 128KB, 256KB, 512KB 64-pin TQFP or PQFN (45 GPIO pins) http://www.atmel.com/Images/32117s.pdf <h3>ATMEL ATtiny 25</h3> Packages: P   = PDIP 08 30mil S   = SOIC 08 EIAJ 208mil SS = SOIC 08 JEDEC 150mil Technologies Note: for complete ordering code (temp. range, finish, tape&reel etc.) see www.atmel.com • Supply Voltage: V = (1.8…5.5)V | [blank] = (2.7…5.5)V • Speed: 10 = 10 MHz | 20 = 20 MHz </pre> <hr /> <author> Author: Dipl.-Ing. FH Rainer Bayer HHN Hochschule Heilbronn (Heilbronn University), rainer.bayer@hs-heilbronn.de Ingenieurbüro ing-rb, mail@ing-rb.de</author> <h3>ATMEL ATtiny 45</h3> Packages: P = PDIP 08 30mil S = SOIC 08 EIAJ 208mil X = TSSOP 08 4.4mm Technologies Note: for complete ordering code (temp. range, finish, tape&reel etc.) see www.atmel.com • Supply Voltage: V = (1.8…5.5)V | [blank] = (2.7…5.5)V • Speed: 10 = 10 MHz | 20 = 20 MHz </pre> <hr /> <author> Author: Dipl.-Ing. FH Rainer Bayer HHN Hochschule Heilbronn (Heilbronn University), rainer.bayer@hs-heilbronn.de Ingenieurbüro ing-rb, mail@ing-rb.de</author> <h3>ATMEL ATtiny 85</h3> Packages: P = PDIP 08 30mil S = SOIC 08 EIAJ 208mil Technologies Note: for complete ordering code (temp. range, finish, tape&reel etc.) see www.atmel.com • Supply Voltage: V = (1.8…5.5)V | [blank] = (2.7…5.5)V • Speed: 10 = 10 MHz | 20 = 20 MHz </pre> <hr /> <author> Author: Dipl.-Ing. FH Rainer Bayer HHN Hochschule Heilbronn (Heilbronn University), rainer.bayer@hs-heilbronn.de Ingenieurbüro ing-rb, mail@ing-rb.de</author> 8/16-bit XMEGA A4U Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 16K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 1K - 2KBytes EEPROM <dd>– 2K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA controller <dd>– Eight-channel event system <dd>– Five 16-bit timer/counters <dd>     Three timer/counters with 4 output compare or input capture channels <dd>     Two timer/counters with 2 output compare or input capture channels <dd>     High-resolution extensions on all timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Five USARTs with IrDA support for one USART <dd>– Two Two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One twelve-channel, 12-bit, 2mspsAnalog to Digital Converter <dd>– One two-channel, 12-bit, 1msps Digital to Analog Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     PDI (program and debug interface) </dl> <il>I/O and packages <dl> <dd>– 34 Programmable I/O pins <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C4 Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd> – 16K - 32KBytes of In-System Self-Programmable Flash <dd> – 4KBytes Boot Code Section with Independent Lock Bits <dd> – 1KBytes EEPROM <dd> – 2K - 4KBytes Internal SRAM </dl> <li>Peripheral features <dl> <dd> – Four-channel event system <dd> – Four 16-bit timer/counters <dd>     Three timer/counters with four output compare or input capture channels <dd>     One timer/counter with two output compare or input capture channels <dd>     High resolution extension on two timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd> – One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd> – Three USARTs with IrDA support for one USART <dd> – Two two-wire interfaces with dual address match (I2C and SMBus compatible) <dd> – Two serial peripheral interfaces (SPIs) <dd> – CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator <dd> – 16-bit real time counter (RTC) with separate oscillator <dd> – One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter <dd> – Two Analog Comparators with window compare function, and current sources <dd> – External interrupts on all general purpose I/O pins <dd> – Programmable watchdog timer with separate on-chip ultra low power oscillator <dd> – QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd> – Power-on reset and programmable brown-out detection <dd> – Internal and external clock options with PLL and prescaler <dd> – Programmable multilevel interrupt controller <dd> – Five sleep modes <dd> – Programming and debug interface <dd>     PDI (program and debug interface) </dl> <li>I/O and packages <dl> <dd> – 34 programmable I/O pins <dd> – 44-lead TQFP <dd> – 44-pad QFN <dd> – 49-ball VFBGA </dl> <li>Operating voltage <dl> <dd> – 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA® Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Four 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counter with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Two USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 200 ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44-lead TQFP <dd>– 44-pad VQFN/QFN <dd>– 49-ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA™ Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Two Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Five USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 2 Msps Analog to Digital Converter <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillato </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4U Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 16K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 1K - 2KBytes EEPROM <dd>– 2K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA controller <dd>– Eight-channel event system <dd>– Five 16-bit timer/counters <dd>     Three timer/counters with 4 output compare or input capture channels <dd>     Two timer/counters with 2 output compare or input capture channels <dd>     High-resolution extensions on all timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Five USARTs with IrDA support for one USART <dd>– Two Two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One twelve-channel, 12-bit, 2mspsAnalog to Digital Converter <dd>– One two-channel, 12-bit, 1msps Digital to Analog Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     PDI (program and debug interface) </dl> <il>I/O and packages <dl> <dd>– 34 Programmable I/O pins <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C4 Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd> – 16K - 32KBytes of In-System Self-Programmable Flash <dd> – 4KBytes Boot Code Section with Independent Lock Bits <dd> – 1KBytes EEPROM <dd> – 2K - 4KBytes Internal SRAM </dl> <li>Peripheral features <dl> <dd> – Four-channel event system <dd> – Four 16-bit timer/counters <dd>     Three timer/counters with four output compare or input capture channels <dd>     One timer/counter with two output compare or input capture channels <dd>     High resolution extension on two timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd> – One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd> – Three USARTs with IrDA support for one USART <dd> – Two two-wire interfaces with dual address match (I2C and SMBus compatible) <dd> – Two serial peripheral interfaces (SPIs) <dd> – CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator <dd> – 16-bit real time counter (RTC) with separate oscillator <dd> – One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter <dd> – Two Analog Comparators with window compare function, and current sources <dd> – External interrupts on all general purpose I/O pins <dd> – Programmable watchdog timer with separate on-chip ultra low power oscillator <dd> – QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd> – Power-on reset and programmable brown-out detection <dd> – Internal and external clock options with PLL and prescaler <dd> – Programmable multilevel interrupt controller <dd> – Five sleep modes <dd> – Programming and debug interface <dd>     PDI (program and debug interface) </dl> <li>I/O and packages <dl> <dd> – 34 programmable I/O pins <dd> – 44-lead TQFP <dd> – 44-pad QFN <dd> – 49-ball VFBGA </dl> <li>Operating voltage <dl> <dd> – 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA® Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Four 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counter with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Two USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 200 ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44-lead TQFP <dd>– 44-pad VQFN/QFN <dd>– 49-ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-Volatile Program and Data Memories <dl> <dd>– 64K - 384K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 32 KB Internal SRAM <dd>     External Bus Interface for up to 16M bytes SRAM <dd>     External Bus Interface for up to 128M bit SDRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Eight 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Four Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extension on all Timer/Counters <dd>     Advanced Waveform Extension on two Timer/Counters <dd>– Eight USARTs <dd>     IrDA modulation/demodulation for one USART <dd>– Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Four SPI (Serial Peripheral Interface) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL and Prescaler <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging <dd>     PDI (Program and Debug Interface) for programming and debugging </dl> <li>I/O and Packages <dl> <dd>– 78 Programmable I/O Lines <dd>– 100 - lead TQFP <dd>– 100 - ball CBGA <dd>– 100 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1U Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatileprogram and data memories <dl> <dd>– 64K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 2KBytes EEPROM <dd>– 4K - 8KBytes internal SRAM <dd>     External bus interface for up to 16Mbytes SRAM <dd>     External bus interface for up to 128Mbit SDRAM </dl> <li>Peripheral features <dl> <dd>– Four-channel DMA controller <dd>– Eight-channel event system <dd>– Eight 16-bit timer/counters <dd>     Four timer/counters with 4 output compare or input capture channels <dd>     Four timer/counters with 2 output compare or input capture channels <dd>     High resolution extension on all timer/counters <dd>     Advanced waveform extension (AWeX) on two timer/counters <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Eight USARTs with IrDA support for one USART <dd>– Four two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Four serial peripheral interfaces (SPIs) <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– Two sixteen channel, 12-bit, 2msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1msps Digital to Analog Converters <dd>– Four Analog Comparators (ACs) with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     JTAG (IEEE 1149.1 compliant) interface, including boundary scan <dd>     PDI (Program and Debug Interface) </dl> <li>I/O and packages <dl> <dd>– 78 Programmable I/O pins <dd>– 100 lead TQFP <dd>– 100 ball BGA <dd>– 100 ball VFBGA </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA A3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64 KB - 256 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 16 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Seven 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Three Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Seven USARTs <dd>     IrDA Extension on 1 USART <dd>– AES and DES Crypto Engine <dd>– Two Two-wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Three SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for test, debug and programming <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA™ Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Two Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Five USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 2 Msps Analog to Digital Converter <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillato </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4U Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 16K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 1K - 2KBytes EEPROM <dd>– 2K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA controller <dd>– Eight-channel event system <dd>– Five 16-bit timer/counters <dd>     Three timer/counters with 4 output compare or input capture channels <dd>     Two timer/counters with 2 output compare or input capture channels <dd>     High-resolution extensions on all timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Five USARTs with IrDA support for one USART <dd>– Two Two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One twelve-channel, 12-bit, 2mspsAnalog to Digital Converter <dd>– One two-channel, 12-bit, 1msps Digital to Analog Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     PDI (program and debug interface) </dl> <il>I/O and packages <dl> <dd>– 34 Programmable I/O pins <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA B1 Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 64K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 2KBytes EEPROM <dd>– 4K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Two-channel DMA controller <dd>– Four-channel event system <dd>– Three 16-bit timer/counters <dd>     Two timer/counters with 4 output compare or input capture channels <dd>     One timer/counter with 2 output compare or input capture channels <dd>     High resolution extensions one timer/counter <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>     Split mode on two timer/counters <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Two USARTs with IrDA support for one USART <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– One two-wire interface with dual address match (I2C and SMBus compatible) <dd>– One serial peripheral interface (SPI) <dd>– 16-bit Real Time Counter (RTC) with separate oscillator <dd>– Liquid Crystal Display <dd>     Up to 4x40 segment driver <dd>     Built in contrast control <dd>     ASCII character mapping <dd>     Flexible SWAP of segment and common terminals buses <dd>– Two eight-channel, 12-bit, 300 thousand SPS Analog to Digital Converters <dd>– Four Analog Comparators with window compare function, and current source feature <dd>– External interrupts on all General Purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     JTAG (IEEE 1149.1 Compliant) interface, including boundary scan <dd>     PDI (Program and Debug Interface) </dl> <li>I/O and Packages <dl> <dd>– 53 Programmable I/O pins <dd>– 100-lead TQFP </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA B3 Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 64K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 2KBytes EEPROM <dd>– 4K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Two-channel DMA controller <dd>– Four-channel event system <dd>– Two 16-bit timer/counters <dd>     One timer/counter with 4 output compare or input capture channels <dd>     One timer/counter with 2 output compare or input capture channels <dd>     High resolution extensions one timer/counter <dd>     Advanced waveform extension (AWeX) on timer/counter <dd>     Split mode on timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– One USART with IrDA support <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE 802.3) generator <dd>– One two-wire interface with dual address match (I2C and SMBus compatible) <dd>– One serial peripheral interface (SPI) <dd>– 16-bit Real Time Counter (RTC) with separate oscillator <dd>– Liquid Crystal Display <dd>     4x25 segment driver <dd>     Built in contrast control <dd>     ASCII character mappingGra <dd>     Flexible SWAP of segment and common terminals buses <dd>– One eight-channel, 12-bit, 300 thousand SPS Analog to Digital Converter <dd>– Two Analog Comparators with window compare function, and current source feature <dd>– External interrupts on all General Purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     JTAG (IEEE 1149.1 Compliant) interface, including boundary scan <dd>     PDI (Program and Debug Interface) </dl> <li>I/O and Packages <dl> <dd>– 36 Programmable I/O pins <dd>– 64 - lead TQFP <dd>– 64 - pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li> High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li> Nonvolatile program and data memories <dl> <dd>– 64K - 256KBytes of In-System Self-Programmable Flash <dd>– 4K - 8KBytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4KBytes EEPROM <dd>– 4K - 16KBytes Internal SRAM </dl> <li>Peripheral features <dl> <dd>– Four-channel event system <dd>– Five 16-bit timer/counters <dd>     Four timer/counters with four output compare or input capture channels <dd>     One timer/counter with two output compare or input capture channels <dd>     High resolution extension on two timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Three USARTs with IrDA support for one USART <dd>– Two two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interface <dd>     PDI (program and debug interface) </dl> <li>I/O and packages <dl> <dd>– 50 programmable I/O pins <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64K - 256K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4K Bytes EEPROM <dd>– 4K - 16K Bytes Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Three USARTs <dd>     IrDA Extension on 1 USART <dd>– Two Two-Wire Interfaces with dual address match(I2C and SMBus compatible) <dd>– Two SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Sixteen-channel, 12-bit, 200ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA C4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA® Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Four 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counter with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Two USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 200 ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44-lead TQFP <dd>– 44-pad VQFN/QFN <dd>– 49-ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-Volatile Program and Data Memories <dl> <dd>– 64K - 384K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 32 KB Internal SRAM <dd>     External Bus Interface for up to 16M bytes SRAM <dd>     External Bus Interface for up to 128M bit SDRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Eight 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Four Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extension on all Timer/Counters <dd>     Advanced Waveform Extension on two Timer/Counters <dd>– Eight USARTs <dd>     IrDA modulation/demodulation for one USART <dd>– Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Four SPI (Serial Peripheral Interface) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL and Prescaler <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging <dd>     PDI (Program and Debug Interface) for programming and debugging </dl> <li>I/O and Packages <dl> <dd>– 78 Programmable I/O Lines <dd>– 100 - lead TQFP <dd>– 100 - ball CBGA <dd>– 100 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1U Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatileprogram and data memories <dl> <dd>– 64K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 2KBytes EEPROM <dd>– 4K - 8KBytes internal SRAM <dd>     External bus interface for up to 16Mbytes SRAM <dd>     External bus interface for up to 128Mbit SDRAM </dl> <li>Peripheral features <dl> <dd>– Four-channel DMA controller <dd>– Eight-channel event system <dd>– Eight 16-bit timer/counters <dd>     Four timer/counters with 4 output compare or input capture channels <dd>     Four timer/counters with 2 output compare or input capture channels <dd>     High resolution extension on all timer/counters <dd>     Advanced waveform extension (AWeX) on two timer/counters <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Eight USARTs with IrDA support for one USART <dd>– Four two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Four serial peripheral interfaces (SPIs) <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– Two sixteen channel, 12-bit, 2msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1msps Digital to Analog Converters <dd>– Four Analog Comparators (ACs) with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     JTAG (IEEE 1149.1 compliant) interface, including boundary scan <dd>     PDI (Program and Debug Interface) </dl> <li>I/O and packages <dl> <dd>– 78 Programmable I/O pins <dd>– 100 lead TQFP <dd>– 100 ball BGA <dd>– 100 ball VFBGA </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA A3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64 KB - 256 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 16 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Seven 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Three Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Seven USARTs <dd>     IrDA Extension on 1 USART <dd>– AES and DES Crypto Engine <dd>– Two Two-wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Three SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for test, debug and programming <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA™ Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Two Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Five USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 2 Msps Analog to Digital Converter <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillato </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4U Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 16K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 1K - 2KBytes EEPROM <dd>– 2K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA controller <dd>– Eight-channel event system <dd>– Five 16-bit timer/counters <dd>     Three timer/counters with 4 output compare or input capture channels <dd>     Two timer/counters with 2 output compare or input capture channels <dd>     High-resolution extensions on all timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Five USARTs with IrDA support for one USART <dd>– Two Two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One twelve-channel, 12-bit, 2mspsAnalog to Digital Converter <dd>– One two-channel, 12-bit, 1msps Digital to Analog Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     PDI (program and debug interface) </dl> <il>I/O and packages <dl> <dd>– 34 Programmable I/O pins <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA B1 Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 64K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 2KBytes EEPROM <dd>– 4K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Two-channel DMA controller <dd>– Four-channel event system <dd>– Three 16-bit timer/counters <dd>     Two timer/counters with 4 output compare or input capture channels <dd>     One timer/counter with 2 output compare or input capture channels <dd>     High resolution extensions one timer/counter <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>     Split mode on two timer/counters <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Two USARTs with IrDA support for one USART <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator <dd>– One two-wire interface with dual address match (I2C and SMBus compatible) <dd>– One serial peripheral interface (SPI) <dd>– 16-bit Real Time Counter (RTC) with separate oscillator <dd>– Liquid Crystal Display <dd>     Up to 4x40 segment driver <dd>     Built in contrast control <dd>     ASCII character mapping <dd>     Flexible SWAP of segment and common terminals buses <dd>– Two eight-channel, 12-bit, 300 thousand SPS Analog to Digital Converters <dd>– Four Analog Comparators with window compare function, and current source feature <dd>– External interrupts on all General Purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     JTAG (IEEE 1149.1 Compliant) interface, including boundary scan <dd>     PDI (Program and Debug Interface) </dl> <li>I/O and Packages <dl> <dd>– 53 Programmable I/O pins <dd>– 100-lead TQFP </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA B3 Microcontroller Features <ul> <li>High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li>Nonvolatile program and data memories <dl> <dd>– 64K - 128KBytes of in-system self-programmable flash <dd>– 4K - 8KBytes boot section <dd>– 2KBytes EEPROM <dd>– 4K - 8KBytes internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Two-channel DMA controller <dd>– Four-channel event system <dd>– Two 16-bit timer/counters <dd>     One timer/counter with 4 output compare or input capture channels <dd>     One timer/counter with 2 output compare or input capture channels <dd>     High resolution extensions one timer/counter <dd>     Advanced waveform extension (AWeX) on timer/counter <dd>     Split mode on timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– One USART with IrDA support <dd>– AES and DES crypto engine <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE 802.3) generator <dd>– One two-wire interface with dual address match (I2C and SMBus compatible) <dd>– One serial peripheral interface (SPI) <dd>– 16-bit Real Time Counter (RTC) with separate oscillator <dd>– Liquid Crystal Display <dd>     4x25 segment driver <dd>     Built in contrast control <dd>     ASCII character mappingGra <dd>     Flexible SWAP of segment and common terminals buses <dd>– One eight-channel, 12-bit, 300 thousand SPS Analog to Digital Converter <dd>– Two Analog Comparators with window compare function, and current source feature <dd>– External interrupts on all General Purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interfaces <dd>     JTAG (IEEE 1149.1 Compliant) interface, including boundary scan <dd>     PDI (Program and Debug Interface) </dl> <li>I/O and Packages <dl> <dd>– 36 Programmable I/O pins <dd>– 64 - lead TQFP <dd>– 64 - pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li> High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li> Nonvolatile program and data memories <dl> <dd>– 64K - 256KBytes of In-System Self-Programmable Flash <dd>– 4K - 8KBytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4KBytes EEPROM <dd>– 4K - 16KBytes Internal SRAM </dl> <li>Peripheral features <dl> <dd>– Four-channel event system <dd>– Five 16-bit timer/counters <dd>     Four timer/counters with four output compare or input capture channels <dd>     One timer/counter with two output compare or input capture channels <dd>     High resolution extension on two timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Three USARTs with IrDA support for one USART <dd>– Two two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interface <dd>     PDI (program and debug interface) </dl> <li>I/O and packages <dl> <dd>– 50 programmable I/O pins <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64K - 256K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4K Bytes EEPROM <dd>– 4K - 16K Bytes Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Three USARTs <dd>     IrDA Extension on 1 USART <dd>– Two Two-Wire Interfaces with dual address match(I2C and SMBus compatible) <dd>– Two SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Sixteen-channel, 12-bit, 200ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA C4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA® Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Four 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counter with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Two USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 200 ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44-lead TQFP <dd>– 44-pad VQFN/QFN <dd>– 49-ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-Volatile Program and Data Memories <dl> <dd>– 64K - 384K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 32 KB Internal SRAM <dd>     External Bus Interface for up to 16M bytes SRAM <dd>     External Bus Interface for up to 128M bit SDRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Eight 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Four Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extension on all Timer/Counters <dd>     Advanced Waveform Extension on two Timer/Counters <dd>– Eight USARTs <dd>     IrDA modulation/demodulation for one USART <dd>– Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Four SPI (Serial Peripheral Interface) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL and Prescaler <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging <dd>     PDI (Program and Debug Interface) for programming and debugging </dl> <li>I/O and Packages <dl> <dd>– 78 Programmable I/O Lines <dd>– 100 - lead TQFP <dd>– 100 - ball CBGA <dd>– 100 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64 KB - 256 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 16 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Seven 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Three Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Seven USARTs <dd>     IrDA Extension on 1 USART <dd>– AES and DES Crypto Engine <dd>– Two Two-wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Three SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for test, debug and programming <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li> High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li> Nonvolatile program and data memories <dl> <dd>– 64K - 256KBytes of In-System Self-Programmable Flash <dd>– 4K - 8KBytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4KBytes EEPROM <dd>– 4K - 16KBytes Internal SRAM </dl> <li>Peripheral features <dl> <dd>– Four-channel event system <dd>– Five 16-bit timer/counters <dd>     Four timer/counters with four output compare or input capture channels <dd>     One timer/counter with two output compare or input capture channels <dd>     High resolution extension on two timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Three USARTs with IrDA support for one USART <dd>– Two two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interface <dd>     PDI (program and debug interface) </dl> <li>I/O and packages <dl> <dd>– 50 programmable I/O pins <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64K - 256K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4K Bytes EEPROM <dd>– 4K - 16K Bytes Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Three USARTs <dd>     IrDA Extension on 1 USART <dd>– Two Two-Wire Interfaces with dual address match(I2C and SMBus compatible) <dd>– Two SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Sixteen-channel, 12-bit, 200ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-Volatile Program and Data Memories <dl> <dd>– 64K - 384K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 32 KB Internal SRAM <dd>     External Bus Interface for up to 16M bytes SRAM <dd>     External Bus Interface for up to 128M bit SDRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Eight 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Four Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extension on all Timer/Counters <dd>     Advanced Waveform Extension on two Timer/Counters <dd>– Eight USARTs <dd>     IrDA modulation/demodulation for one USART <dd>– Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Four SPI (Serial Peripheral Interface) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL and Prescaler <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging <dd>     PDI (Program and Debug Interface) for programming and debugging </dl> <li>I/O and Packages <dl> <dd>– 78 Programmable I/O Lines <dd>– 100 - lead TQFP <dd>– 100 - ball CBGA <dd>– 100 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64 KB - 256 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 16 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Seven 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Three Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Seven USARTs <dd>     IrDA Extension on 1 USART <dd>– AES and DES Crypto Engine <dd>– Two Two-wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Three SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for test, debug and programming <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li> High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller <li> Nonvolatile program and data memories <dl> <dd>– 64K - 256KBytes of In-System Self-Programmable Flash <dd>– 4K - 8KBytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4KBytes EEPROM <dd>– 4K - 16KBytes Internal SRAM </dl> <li>Peripheral features <dl> <dd>– Four-channel event system <dd>– Five 16-bit timer/counters <dd>     Four timer/counters with four output compare or input capture channels <dd>     One timer/counter with two output compare or input capture channels <dd>     High resolution extension on two timer/counters <dd>     Advanced waveform extension (AWeX) on one timer/counter <dd>– One USB device interface <dd>     USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant <dd>     32 Endpoints with full configuration flexibility <dd>– Three USARTs with IrDA support for one USART <dd>– Two two-wire interfaces with dual address match (I2C and SMBus compatible) <dd>– Two serial peripheral interfaces (SPIs) <dd>– CRC-16 (CRC-CCITT) and CRC-32 (IEEE®802.3) generator <dd>– 16-bit real time counter (RTC) with separate oscillator <dd>– One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter <dd>– Two Analog Comparators with window compare function, and current sources <dd>– External interrupts on all general purpose I/O pins <dd>– Programmable watchdog timer with separate on-chip ultra low power oscillator <dd>– QTouch® library support <dd>     Capacitive touch buttons, sliders and wheels </dl> <li>Special microcontroller features <dl> <dd>– Power-on reset and programmable brown-out detection <dd>– Internal and external clock options with PLL and prescaler <dd>– Programmable multilevel interrupt controller <dd>– Five sleep modes <dd>– Programming and debug interface <dd>     PDI (program and debug interface) </dl> <li>I/O and packages <dl> <dd>– 50 programmable I/O pins <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Operating frequency <dl> <dd>– 0 – 12MHz from 1.6V <dd>– 0 – 32MHz from 2.7V </dl> </ul> 8/16-bit XMEGA C3 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 64K - 256K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Code Section with Independent Lock Bits <dd>– 2K - 4K Bytes EEPROM <dd>– 4K - 16K Bytes Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     One Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High Resolution Extensions on two Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Three USARTs <dd>     IrDA Extension on 1 USART <dd>– Two Two-Wire Interfaces with dual address match(I2C and SMBus compatible) <dd>– Two SPI (Serial Peripheral Interfaces) <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Sixteen-channel, 12-bit, 200ksps Analog to Digital Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interface <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 50 Programmable I/O Lines <dd>– 64-lead TQFP <dd>– 64-pad QFN </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A1 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGATM Microcontroller <li>Non-Volatile Program and Data Memories <dl> <dd>– 64K - 384K Bytes of In-System Self-Programmable Flash <dd>– 4K - 8K Bytes Boot Section with Independent Lock Bits <dd>– 2 KB - 4 KB EEPROM <dd>– 4 KB - 32 KB Internal SRAM <dd>     External Bus Interface for up to 16M bytes SRAM <dd>     External Bus Interface for up to 128M bit SDRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Eight 16-bit Timer/Counters <dd>     Four Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Four Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extension on all Timer/Counters <dd>     Advanced Waveform Extension on two Timer/Counters <dd>– Eight USARTs <dd>     IrDA modulation/demodulation for one USART <dd>– Four Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Four SPI (Serial Peripheral Interface) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with separate Oscillator <dd>– Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters <dd>– Two Two-channel, 12-bit, 1 Msps Digital to Analog Converters <dd>– Four Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL and Prescaler <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     JTAG (IEEE 1149.1 Compliant) Interface for programming, test and debugging <dd>     PDI (Program and Debug Interface) for programming and debugging </dl> <li>I/O and Packages <dl> <dd>– 78 Programmable I/O Lines <dd>– 100 - lead TQFP <dd>– 100 - ball CBGA <dd>– 100 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> 8/16-bit XMEGA A4 Microcontroller Features <ul> <li>High-performance, Low-power 8/16-bit Atmel® AVR® XMEGA™ Microcontroller <li>Non-volatile Program and Data Memories <dl> <dd>– 16 KB - 128 KB of In-System Self-Programmable Flash <dd>– 4 KB - 8 KB Boot Code Section with Independent Lock Bits <dd>– 1 KB - 2 KB EEPROM <dd>– 2 KB - 8 KB Internal SRAM </dl> <li>Peripheral Features <dl> <dd>– Four-channel DMA Controller with support for external requests <dd>– Eight-channel Event System <dd>– Five 16-bit Timer/Counters <dd>     Three Timer/Counters with 4 Output Compare or Input Capture channels <dd>     Two Timer/Counters with 2 Output Compare or Input Capture channels <dd>     High-Resolution Extensions on all Timer/Counters <dd>     Advanced Waveform Extension on one Timer/Counter <dd>– Five USARTs <dd>     IrDA Extension on one USART <dd>– Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible) <dd>– Two SPIs (Serial Peripheral Interfaces) peripherals <dd>– AES and DES Crypto Engine <dd>– 16-bit Real Time Counter with Separate Oscillator <dd>– One Twelve-channel, 12-bit, 2 Msps Analog to Digital Converter <dd>– One Two-channel, 12-bit, 1 Msps Digital to Analog Converter <dd>– Two Analog Comparators with Window compare function <dd>– External Interrupts on all General Purpose I/O pins <dd>– Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillato </dl> <li>Special Microcontroller Features <dl> <dd>– Power-on Reset and Programmable Brown-out Detection <dd>– Internal and External Clock Options with PLL <dd>– Programmable Multi-level Interrupt Controller <dd>– Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby <dd>– Advanced Programming, Test and Debugging Interfaces <dd>     PDI (Program and Debug Interface) for programming, test and debugging </dl> <li>I/O and Packages <dl> <dd>– 34 Programmable I/O Lines <dd>– 44 - lead TQFP <dd>– 44 - pad VQFN/QFN <dd>– 49 - ball VFBGA </dl> <li>Operating Voltage <dl> <dd>– 1.6 – 3.6V </dl> <li>Speed performance <dl> <dd>– 0 – 12 MHz @ 1.6 – 3.6V <dd>– 0 – 32 MHz @ 2.7 – 3.6V </dl> </ul> AVR ISP-6 Serial Programming Header 6 pin edge connector for ISP with ATMEL MCUs. Developed by Craig Moates (craig at moates dot net). Library by David Blundell (blundar at gmail dot com). Often, even a 6 pin header is really inconvenient for board layout and/or production. This SMD-only header is our de-facto standard for using an edge connector for programming with the help of a 6pin/10pin to edge card adapter. AVR ISP-10 Serial Programming Header AVR PDI programming interface connector AVR TPI connector • High Performance, Low Power AVR® 8-bit Microcontroller • Advanced RISC Architecture – 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation • High Endurance, Non-volatile Memory Segments – 2K/4K/8K Bytes of In-System, Self-programmable Flash Program Memory • Endurance: 10,000 Write/Erase Cycles – 128/256/512 Bytes of In-System Programmable EEPROM • Endurance: 100,000 Write/Erase Cycles – 128/256/512 Bytes of Internal SRAM – Data Retention: 20 years at 85°C / 100 years at 25°C – Programming Lock for Self-programming Flash & EEPROM Data Security • Peripheral Features – One 8-bit and One 16-bit Timer/Counter with Two PWM Channels, Each – 10-bit ADC • 8 Single-ended Channels • 12 Differential ADC Channel Pairs with Programmable Gain (1x / 20x) – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator – Universal Serial Interface • Special Microcontroller Features – debugWIRE On-chip Debug System – In-System Programmable via SPI Port – Internal and External Interrupt Sources • Pin Change Interrupt on 12 Pins – Low Power Idle, ADC Noise Reduction, Standby and Power-down Modes – Enhanced Power-on Reset Circuit – Programmable Brown-out Detection Circuit with Software Disable Function – Internal Calibrated Oscillator – On-chip Temperature Sensor • I/O and Packages – Available in 20-pin QFN/MLF/VQFN, 14-pin SOIC, 14-pin PDIP and 15-ball UFBGA – Twelve Programmable I/O Lines • Operating Voltage: – 1.8 – 5.5V • Speed Grade: – 0 – 4 MHz @ 1.8 – 5.5V – 0 – 10 MHz @ 2.7 – 5.5V – 0 – 20 MHz @ 4.5 – 5.5V • Industrial Temperature Range: -40°C to +85°C • Low Power Consumption – Active Mode: • 210 μA at 1.8V and 1 MHz – Idle Mode: • 33 μA at 1.8V and 1 MHz – Power-down Mode: • 0.1 μA at 1.8V and 25°C Atmel Tiny2313 2K Flash, 128 bytes EEPROM, 128 bytes RAM JTAG Programming/Debug Connector AT91SAM9260 MCU AT91 ARM-9 Thumb Microcontroller AT91SAM9260 MCU AT91 ARM-9 Thumb Microcontroller AT91SAM7S512/256/128/64/321 ARM7 Processor • Advanced RISC Architecture – 130 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: 10,000 Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles – 512 Bytes Internal SRAM – Programming Lock for Software Security • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Four PWM Channels – 8-channel, 10-bit ADC 8 Single-ended Channels 7 Differential Channels for TQFP Package Only 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x for TQFP Package Only – Byte-oriented Two-wire Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, 44-lead PLCC, and 44-pad MLF • Operating Voltages – 2.7 - 5.5V for ATmega8535L – 4.5 - 5.5V for ATmega8535 • Speed Grades – 0 - 8 MHz for ATmega8535L – 0 - 16 MHz for ATmega8535 • High-performance, Low-power AVR® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • Nonvolatile Program and Data Memories – 8K Bytes of In-System Self-Programmable Flash Endurance: 10,000 Write/Erase Cycles – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles – 512 Bytes Internal SRAM – Programming Lock for Software Security • Peripheral Features – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Real Time Counter with Separate Oscillator – Four PWM Channels – 8-channel, 10-bit ADC 8 Single-ended Channels 7 Differential Channels for TQFP Package Only 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x for TQFP Package Only – Byte-oriented Two-wire Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator • Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby • I/O and Packages – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, 44-lead PLCC, and 44-pad MLF • Operating Voltages – 2.7 - 5.5V for ATmega8535L – 4.5 - 5.5V for ATmega8535 • Speed Grades – 0 - 8 MHz for ATmega8535L – 0 - 16 MHz for ATmega8535 The AT93C46B provides 1024 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential. The AT93C46B is available in space saving 8-pin PDIP and 8-pin JEDEC packages. The AT93C46B is enabled through the Chip Select pin (CS), and accessed via a 3- wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a READ instruction at DI, the address is decoded and the data is clocked out serially on the data output pin DO. The WRITE cycle is completely selftimed and no separate ERASE cycle is required before WRITE. The WRITE cycle is only enabled when the part is in the ERASE/WRITE ENABLE state. When CS is brought “high” following the initiation of a WRITE cycle, the DO pin outputs the READY/BUSY status of the part. The AT93C46B is available in 4.5V to 5.5V, 2.7V to 5.5V, and 2.5V to 5.5V versions. As a convenience feature of the windshield wiper, intermittent and wipe/wash operation fuctions are implemented in most of the automobiles. The U642B is a cost-effective solution for an accurate timing function control. Wipe/wash mode has priority over interval mode. Interval pause and after-wiping time can be set to fixed values by using resistors in a broad time range. Added value can be provided with an individual, continuous adjustment of the interval pause by a potentiometer which may be built into the stalk. For proper operation, it is mandatory to feed the signal of the wiper motor's park switch into U642B. The L9686 is a two frequency oscillator particularly suitable as relay driver for flashing light control in automotive applications. The circuit may be also used for other warning lamps like ”handbrake on” etc. The lamp failure detection is given by doubling the flash repetition frequency. The L9686 is supplied in minidip 8-lead and SO8 plastic packages. MICROCONTROLLER 32 Kbytes FLASH 2 Kbytes SRAM 1 Kbytes EEPROM USART 8-channel 10 bit ADC Source: www.atmel.com .. doc2503.pdf 8-bit Microcontroller with 1K Bytes In-System Programmable Flash 8/16-bit Atmel AVR XMEGA Microcontrollers